Supergirl Hueforge

Original artwork: https://www.deviantart.com/mechanianspidy/art/Supergirl-1209174139

Project: Supergirl 1.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.76mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA Sunlu Meta Black  Transmission Distance: 1
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #fd3e3e PLA Sunlu Meta red  Transmission Distance: 7
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #e4bdd0 PLA BambuLab Matte Sakura Pink  Transmission Distance: 3
    #ffffff PLA Default White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Cyan
    At layer #9 (0.8mm) swap to red
    At layer #15 (1.28mm) swap to Yellow
    At layer #18 (1.52mm) swap to Sakura Pink
    At layer #21 (1.76mm) swap to White for the rest.