Pokémon Charmander LED table lamp kit-001

Bring the magic of Pokémon into your room with this Charmander tail lamp 🔥
The design is meant to be simple to print, and assembly is done with two-component glue, perfect as both a '90s decor lamp and as a light for your gaming room or children's bedroom.

✅ Easy to print and Large 📏 Model dimensions: approximately 35 h x 20 x 16 cm

Assembly:

step 1: thread the LED cable inside the tail. Glue the LED with 3M double-sided tape onto its specific support.

step 2: Glue the support to the tail with two-component glue (see photo).

step 3: Glue the support to the contact points with the large flame using two-component glue.

step 4: Glue the small flame to the large flame.

✅ Compatible with LED lamp kit-001

I used these filaments:

Polymaker PLA HT Gradient Fire for the tail and LED support

Jayo red PETG for the large flame

Polymaker PLA HT Yellow for the small flame

But for a better effect, you can try Bambu PETG Translucent and PLA Matte filaments.