Print Profile(1)
Description
Description
LED name lamp SVEN
Each letter consists of the colored part and a cover.
Use solid colors for the lower part and white for the upper part if RGB LEDs are to be used.
The letters are approx. 15.5 cm high and 5 cm deep.
The white cover is 0.6 mm thick and has a distance to the letter of 0.2 mm.
I used Uhu Allplast glue to glue the letters together. Usually, no glue is needed for the inserts.
In principle, any LED strip can be used. This is glued to the outer walls of the letters or optionally to the floor.
I recommend LED strips with 60 LEDs/m.
For support or another name just write to me.
-------------------------------------------------------------------------------------------------------------------------------
LED Name Lamp SVEN
Each letter consists of the colored part and a cover.
Use solid colors for the lower part and white for the upper part if RGB LEDs are to be used.
The letters are approx. 15.5 cm high and 5 cm deep.
The white cover is 0.6 mm thick and has a distance to the letter of 0.2 mm.
I used Uhu Allplast glue to glue the letters together. Usually, no glue is needed for the inserts.
In principle, any LED strip can be used. This is glued to the outer walls of the letters or optionally to the floor. I recommend LED strips with 60 LEDs/m.
For support or another name just write to me.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)