Vekoma Corkscrew roller coaster model
Print Profile(1)
Description
A realistic model of a roller coaster corkscrew designed by Vekoma. It's inspired by Formula at Energylandia. I recommend printing it with basic PLA, but you can try other filaments at your own risk. The model is 2 plates and takes about 22 hours (or 17 if you print it from Bambu studio) to print it in full color. To remove the supports for the track I recommend using small pliers and removing at the thick part of the supports and they should come off easily. I recommend using superglue and building from bottom to top and the chart I made labels where all of the pieces should go. Enjoy! (and let me know if there's anything wrong with the print)
Building Difficulty: 4/10
Dimensions: (Length - 8.7 inches) x (Width - 12.5 inches) x (Height - 8.1 inches)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (26)