Hermione's Time turner Clock

In need of a new clock, as wall art or on a table ? 

Check out Hermione's Timer turner clock

I re-made the entire model on OnShape in multiple parts to achieve a 50x50 centimer clock at the end that you can either hang on you wall or install on desk or other side furniture. 

I personaly printed most files in white ivory PLA and then painted it with Montana spraycans but you can also use multiple color as the model is cut into parts.

Watch the video on instagram (@behivee.workshop)

Infos

• Outer circle is in 4 parts, use a 4mm dowels to add rigidity in the prepared holes
• Middle circle is in 4 parts, use a 4mm dowels to add rigidity in the prepared holes
• Inner clock is in 2 parts (with a back ring) that you will need to superglue
• The little hour pieces are push-in-place parts really tight, normally no glue needed

Dowels and Clock

• The center hole for the clock mecanism is 8mm in diameter
• You will need 8mm dowels (wooden dowels for example) to connected the pieces for the rings

NOTE

If you want to install the clock using the two towers, 
they are light, you may want to either add more strengh in the bottom or glue them to a base ;)

Happy printing