ANIME Keychains from New Gen Shonen NO AMS

A collection of anime logos as keychains from new gen shonens I put together in blender, would make a great gift or to give away at a con. Hope you enjoy

No AMS needed all can be printed with manual switches. Some are printed at 0.08 and some at 0.2 just depends on the level of detail you want, If you have a smaller nozzle that would be even better.

Layer pauses are as follows

JJK 0.2mm : pause at Layer 14

CSM 0.08mm : pause at layer 11

DanDaDan0 0.2mm : pause at layer 9

Demon Slayer 0.08mm : Start at white switch to black at Layer 20 and to red at 30

Haikyuu 0.2mm : pause at layer 14 (I Included a version of the haikyuu file where the orange part is printed on top, i think it looks worse but if you like it feel free to print it that way)

Gachiakuta 0.08mm : pause at layer 29

Noragami 0.2mm : Pause at layer 9

Sakamoto Days 0.08 : Start with white switch to black at layer 11 then to yellow at 13 and to red at 18 

I've included all my blender files from the start to finish so you can make modifications mid design if thats something you want to do but be warned my work flow is all over the place so do so at your own risk. When you import the STLs from blender into Bambu Slicer they need to be made manifold before printed so I've included those manifold STLs aswell. I'd suggest to use the manifold ones if you are just changing stuff within slicers but if you want to make Modifications to the model itself id say use the non-manifold version.

Let me know what keychains I should do next or what you want to see

If you would like me to change something or if Ive made mistakes please let me know I'm happy to help resolve any issues or mistakes I made

I used keychains I found on amazon that were 100pc for 7€ and they work great.

Feel free to make modifications etc, credit appreciated 

Comment if you have any issues <3