License Plate Holder Niu M1 Pro/Sport

Here is my second attempt at a license plate holder for the Niu M1 Pro/Sport (and possibly similar models), after the first version scrapes/rubs on the inner fender/"mudguard" and is therefore not suitable for the Niu M1 The original license plate holder does not really fit German insurance license plates, this model completely replaces the license plate holder Only screws are needed to attach the license plate itself (2x M4x10 screws, 2x M4 nuts, optionally washers for the back for better pressure distribution), the holder is attached with the existing original screws 

Installation instructions: 

1. Disassemble any existing license plate
2. Loosen the two screws from the frame through the hole in the original license plate holder
3. Once the license plate holder is loose, loosen the two screws of the license plate light (cable has enough play to be pulled out a bit)
4. Fasten the license plate light to the new holder with the two original screws
5. Fasten the new license plate holder to the frame with the two original screws
6. Fasten the insurance license plate to the holder