Goku Hueforge - Dragon Ball Z
Print Profile(2)
Description
Boost Me (for free)
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️
Membership
With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!
Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.
Project: All Goku.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Bambulab Litho Cyan Transmission Distance: 1.7
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 4.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Cyan
At layer #11 (0.96mm) swap to Black
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White
At layer #20 (1.68mm) swap to Yellow
At layer #23 (1.92mm) swap to Jade White for the rest.
How to print more than 4 colours with a single AMS: from 42 sec onwards in the video
License
Comment & Rating (43)