Pluggable Diamond Painting Tray

Pluggable Diamond Painting Tray with 3 different Trays

I present to you my newest Diamond Painting Tray. A pluggable Diamond Painting container with three different Trays.

First, I'll tell you my thoughts and the creation of my new Diamond Painting Tray. :-)

With my original Diamond Painting Tray, for example, with the 30er garage, you need a lot of space on the table, depending on the number of units. And anyone who enjoys diamond painting knows that space is at a premium.

So my wife and I came up with the idea of creating a space-saving version of a Diamond Painting Tray and garage.

The new version should work without magnets, be small and space-saving, and the connection to the Tray should be easy.

With this in mind, I first created a container that has space for many Diamond Painting Stones, is lockable, and can be easily attached to a Tray.

About the procedure:

The container is attached and detached from the tray using a push button and spring inside. The container has a lid that simply snaps on and a slot on the back where you can open the lid with your fingernail or a flat-head screwdriver.

First, you attach the fixed side to the tray and then the removable side to the tray using the push button.

Once you've attached the container to the tray, you can pull the plug off the container and shake out your stones. The rest is pretty much standard. :)

Once you're done, shake the stones back into the container and close it with the plug.

Then press the push button and remove the container from the tray and put it back in the garage.

I will upload the matching garages separately. There will be a 40er garage and a 60er garage. 

Here's the link to the garages: click me :-) 

There will be my three familiar Trays, and you can choose which ones you want to use. These three are all on one plate, and you can move your favorite one to another plate and print it. Or you can simply print all three versions and be spoiled for choice later. :-) 

Plate 1: Pluggable Container with all parts 

Plate 2: 3 different Trays to choose from

Printing Notes:

1. Print parameters were adjusted by me.
2. Speed was limited to ensure a clean print.
3. Supports have been activated and are only needed for the fixed hook!
4. The support parameters have been adjusted accordingly, and the interface will be printed with PETG. The spacing is set accordingly.
5. Important! If you print the supports only with PLA, you absolutely must adjust the support parameters YOURSELF!
6. The Trays on the second plate are again designed this way so that you can customize the colors. This spacing should be familiar from my other Diamond Painting Trays.

I hope you have fun with my latest Diamond Painting Tray and testing the functionality of a pluggable Diamond Painting Tray.

If you have any questions or concerns, please leave a comment or send me a private message :-)