Red Hood vs Deathstroke Helmet
Print Profile(1)
Bill of Materials
Description
Red Hood 2025 Helmet.
The helmet is designed to have interchangeable parts with the new Deathstroke vs Red hood 2025 helmet. You can make one, two, or all three. Mix, match, and mirror parts for a custom look, and change colors for even more fun – the choice is yours.
With Bonus Half version for the Deathstroke Helm.
The Deathstroke helm can be found here – https://makerworld.com/en/models/1790678-deathstroke-vs-redhood-2025-helmet#profileId-1908331
The Black Detail lines are separate parts and lay flat on the bed for the best print results.
Installing the Black Detail Lines – First, push the lines in as much as possible with your hands and a small tool (I used the small Allen wrench that came with my P1S). Use a hair dryer on low to soften the parts that need bending. A lighter can be used but is not recommended. Glue is needed in some areas to keep the lines down.
Sized to fit my number 3 sizing head found here - https://makerworld.com/en/models/525268
Uses 8x2mm and 5x2mm Magnets, - Be sure to use the magnets in the BOM as they were tested and work properly.
Magnets in total for the build - 8x2mm = 20 in total - 5x2mm = 52 in total
Use Super Glue "I use the gel kind" when inserting the Magnets, Detail Lines, and Eye Lens.
Enjoy
This is unrelated to the model and is only for those interested in what's been going on with me lately. I never thought I'd say this, but my ever growing popularity is making it difficult to stay hidden. There was a time when I could disappear for a few weeks, and no one would notice. Not so easy now; if I don't post for a week, people think I'm dead! LOL. I was diagnosed with schizophrenia as a young adult, and the medication I take is dangerous if not monitored constantly. If my levels get too high, I have to stop taking it for a short period. During this time, I tend to keep to myself because I don't feel like myself. This isn't something I like to discuss or make known. Nothing changes regarding modeling; I'm still working, just not talking as much. I hope everyone understands and can give me the time I need.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (105)