Locker Pen Holder
Print Profile(1)
Bill of Materials
.jpg){kind=small}
- 3M Velcro Command Strips x 4:
Description
Stay organized with this locker pen holder that has the option for four 8x2 mm magnets recessed into the back to attach to the inside door of a metal locker at school, the gym, a refrigerator, etc. Has three individual compartments to hold pens, pencils, markers, etc. Works best with only these items as I haven't tested other objects to fit and stay attached with magnets on metal. It's possible to stick 3M Velcro command strips to the back if magnets are not an option.
I hope you are able to print this model and find some use out of it. If you decide to print, please offer a free boost for your support, a rating, pics, and any feed back is welcome. Thanks
Measurements are:
- Outside is 120 mm length x 45 mm depth x 103.19 mm back wall height
- Inside two outer compartments are 25 mm wide x 39 mm depth x approx. 98 mm back wall height
Inside middle compartment is 58 mm wide x 39 mm depth x 98 mm back wall height
Supplies needed:
- Four 8x2 mm magnets super glued in place (see Bambu Labs link to buy the magnets)
- Optional four 3M Velcro command strips
- PLA, PLA+, or PETG filaments work best
Boost Me (for free)
If you like this model and want to support this creation, please give a rating, comment, or a boost. Thanks
Membership
To support my current and future model designs, consider purchasing a commercial license from the link in my profile.
Buy Me A Coffee
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)