Modular bottle, drink shaker, and tumbler dryer

This is a modular system to dry shaker bottles, tumblers, and water bottles. 

The posts lift the container up so it can get plenty or air flow to help with drying, and the bases will catch any water drips. Just choose if you want to dry just the bottle, or also have a place to dry lids. 

There are 2 types of bases: 

• one is a combined base for both the lid and the container
• the other are two separate bases. 

There are also 2 variations of each base: one is flat on top, and the other is slanted to help catch any water drips.  

Note: The print profile included uses adaptive line heights to help make the slanted top smooth. If you have issues with adaptive line heights, print the flat top model instead. 

The bases and the posts are printed separately, so there’s no need for an AMS. No supports needed, either.

There are also 2 types of posts

• short posts for tumblers and shaker bottles
• universal tall posts that will work with water bottles, as well as tumblers and shakers
• there’s an additional single tall post to hang a lid on the solo base, and a post for hanging a lid on the combined base. Just replace one of the regular posts with the taller combined posts when used with the combined base.  (See example pictures for reference)

Just choose the type of base you want (single or combined, flat top or angled), and the type of posts (short or tall)

Bases are printed with 15% gyroid infill. Posts are printed with 20% gyroid infill. 

UPDATE:

I have added additional posts that are a little wider, to accommodate wider shaker bottles, and a tall post for the larger lid. If your shaker bottle has a spring insert, it can rest on the center posts with the bottle.