Search models, users, collections, and posts
Kage Oni: Phantom Shinobi Mask
IP Report
Print Profile(3)
0.16mm layer, 3 walls, 15% infill
Designer
8.2 h
1 plate
A1 and other smaller Printers
17.2 h
1 plate
Created for A1 mini, Broken into 2 plates to fit
20.3 h
2 plates
Open in Bambu Studio
Boost
467
1213
46
14
953
287
Released
Description
Hit that like and follow please
| Setting | Recommended Value |
| Layer Height | 0.12 mm (for fine detail) |
| Wall Line Count | 3 |
| Top/Bottom Layers | 5 |
| Infill Density | 15-20% (Gyroid or Cubic) |
| Printing Temp | 210–215°C (adjust for filament) |
| Bed Temp | 60°C |
| Print Speed | 50 mm/s (reduce to 35-40 mm/s for small details) |
| Retraction Distance | 0.8 mm |
| Retraction Speed | 40 mm/s |
| Cooling Fan | 100% (enable after first few layers) |
| Supports | Yes — Tree Supports, build plate only |
| Z Seam | Sharpest Corner or Back |
| Build Plate Adhesion | Skirt or Brim for safety |
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (46)