Sgns H0 60ft Container Flatcar H0

Res flatcar in H0 scale
The model is optimized for printing with common 3D printers. The main body should be printed upside down – for the images, it was simply flipped.

This type of wagon is widely used on European railways, both in full and mixed trains. It is characterized by its versatility: it often transports sand, pipes, lumber, cars or agricultural machinery, lighter military vehicles, wire or steel coils, or concrete components.

Required Accessories

• Screws M1–M1.4 (up to 3 mm length). A cheap set is available here:
  https://www.amazon.de/dp/B0CMNQ4Q4N?ref=ppx_yo2ov_dt_b_fed_asin_title
• Bogies from Evemodel:
  • With metal wheels (4 pieces): https://de.aliexpress.com/item/1005004595697388.html
  • With plastic wheels (12 pieces): https://de.aliexpress.com/item/1005004696612430.html

Assembly Instructions

• Supports are required for the air tanks in the Res_Parts files. Also, use adhesive to securely connect all parts.
• The NEM shaft, washers, and mounting points for the bogies were not designed by me, but by digitalmarc – many thanks for that!

🇩🇪 German

This model is based on “Sgns H0 60ft Containertragwagen” by digitalmarc
Source: https://www.thingiverse.com/thing:XXXXX ← (insert original link)
Licensed under CC BY-NC 4.0.
(Modified by me)

🇬🇧 English

This model is based on “Sgns H0 60ft Containertragwagen” by digitalmarc
Source: https://www.thingiverse.com/thing:XXXXX ← (insert original link)
Licensed under CC BY-NC 4.0.
(Modified by me)