Scruffy from Futurama

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #9d432c PLA BambuLab Basic Brown  Transmission Distance: 2
    #e8dbb7 PLA BambuLab Matte Desert Tan  Transmission Distance: 1
    #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Basic Blue Gray
    At layer #12 (1.04mm) swap to BambuLab Basic Brown
    At layer #15 (1.28mm) swap to BambuLab Matte Desert Tan
    At layer #20 (1.68mm) swap to BambuLab Basic Brown
    At layer #21 (1.76mm) swap to BambuLab Basic Gray
    At layer #22 (1.84mm) swap to BambuLab Basic Jade White for the rest.