Spool Holder X 18mm Tubes

A simple but effective spool holder printed in ABS and with the addition of common steel tubes (18mm diameter in the model). It's possible to use plastic, copper, or wooden tubes without any problem

Why raised off the ground?! Simple, this way my floor cleaning robot can keep it clean without problems and dust won't accumulate under the spools!!!

The project can be easily modified for tube diameter and height from the ground. For assembly?! First insert one tube, then the other, into the appropriate holes. You decide the length based on your needs. I chose 60cm as the length, I advise against excessive lengths to prevent the model from sagging. If you don't want to cut the tubes or for other needs, I have added a piece to be inserted in the center as a support if you want or need to use longer tubes