P1/X1 Exhaust Fan Adaptor 100 mm hose 45° angled
Print Profile(1)
Description
This is my take on an exhaust fan hose adaptor. I wanted something sleek looking that can be detached. The adaptor fits a 100 mm hose.
The model consists of two parts. The mounting plate needs to be screwed onto the back plate of the printer onto the exhaust fan outlet. You need to replace one of the existing screws to mount it. You need a total of four M3 screws.
To connect the hose adaptor to the mounting plate you need a total of fifteen 10x2 mm round magnets. These need to be glued into the holes on the two pieces. Make sure to use the same orientation of the magnets for all positions on the mounting plate and the opposite orientation on the hose adaptor.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)