[N, H0, 0 et 1] Cobblestone texture sheet

These cobblestone sheets are specially designed for creating roads, squares, or railway scenery at HO–H0, 0, 1 scales, and now N.

The sheets for HO–H0, 0, and 1 scales have a thickness of 0.4 mm, while those dedicated to N scale are specially adjusted to a thickness of 0.2 mm to ensure a realistic rendering suitable for very small dimensions.

For N scale printing, it is recommended to use a 0.2 mm nozzle to achieve the best detail.

The sheets are easily cut with scissors or a utility knife, and their modular geometry allows for simple and fluid interlocking to create paved surfaces according to your needs.

Cut and glue the cobblestones directly onto your support. Once in place, you can paint them with a special cobblestone paint, such as Décapod 8741 (water-based acrylic matte paint). Then apply a filler to simulate the joints, and immediately clean off the excess with a damp sponge for a realistic and neat finish.

The cobblestone blocks are available individually or in sheets of 32, 64, 128, 256, or 410 units, depending on the scale and your needs.

👉 Other compositions and scales will be available in the coming days.