Snugged Triangle Key For GWEIKE M Series or others

This key can be used for any triangle lock with similar sizes.  But I originally designed it to be for the G-Weike M 6 in 1 series.  I tested in my other laser machines which have similar locks and it works great.

I included 3 sizes which should fit most of the locks out there.  You should try to print a set in “Extra draft” profile, which has 0.28mm layer height for speed, to check fit.  I printed with this profile for my own use with PLA and it seems pretty durable.  However your milage might vary.  So use any material that you see fit your application.

Ideally, you want to have it fit fairly snugged so it would stay there.  I had to use a little bit of force to push it all the way in.  I would also apply some type of glue/adhesive to help it stay put.