Tiberiu

cover

IMG_0524.jpeg

IMG_0523.jpeg

IMG_0521.jpeg

IMG_0522.jpeg

plate_1.png

2025-09-25_2a1ddeb754aae.jpeg

&nbsp;<ul><li>Layer height: 0.12 mm (0.2 mm initial layer)</li><li>Walls: 3 loops</li><li>Top/Bottom layers: 5 each (0.6 mm thick, monotonic pattern)</li><li>Infill: 20% Gyroid</li><li>Supports: Enabled, Tree (auto), 20° threshold</li><li>Bed adhesion: Skirt disabled, Brim auto if needed</li><li>Prime tower: Enabled with rib wall</li><li>Cooling: standard PETG fan settings (20–30%)</li></ul>&nbsp;&nbsp;Notes:&nbsp;<ul><li>No additional supports are required beyond the automatic Tree supports.</li><li>Model is designed for PETG for flexibility and snug fit in the Tesla console.</li><li>Print one per plate (or duplicate as needed)</li></ul>&nbsp;

0.12mm layer, 3 walls, 20% infill

Cable holder designed for the Tesla Model 3 Highland center console, guiding two USB-C charging cables through a clean slot while keeping them firmly in place. Perfect for preventing cable clutter and ensuring easy access for both driver and passenger.&nbsp;The part is printed in PETG, giving it the right balance of strength (in the sun) and flexibility. Its snap-fit design allows it to stay fixed inside the console without wobbling.&nbsp;That’s my first 3D model made from scratch, so I hope you like it! :D

Tesla Model 3 Highland Center Console USB-C Holder

ASIA

Print Profile(1)

Description

Comment & Rating (5)

License

Related Models