Luigi Hueforge

Bring a touch of retro gaming flair to your wall or display with this custom Hueforge artwork featuring Luigi in a dramatic manga-inspired design.

This print captures Luigi mid-action with his Poltergust, bursting through the scene with bold black-and-white linework and accented with a striking swirl of green energy. The dynamic explosion effect and comic-style shading make it look like it’s leapt straight out of a graphic novel

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #00f52c PLA Sunlu Green  Transmission Distance: 6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to White
    At layer #23 (1.92mm) swap to Green for the rest.

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays the same as changing this will affect how the print turns out)