Bird's Cathedral

Each model is a little piece of my passion for design, creativity, and bold ideas

Here is a second model of a bird feeder, in cathedral style

It is well received by small birds such as great tits, sparrows, etc

A beautiful and useful eye-catcher in the garden or on the house wall

I had been preparing this project for a while and am happy to share it with the community :-)

• Fully modular design
• Versatile mounting options
• Wind chime on the roof

• Equipped with a birdbath that fills itself when it rains

   

  Assembly tips:

  Everything is designed so that it can be plugged together (it holds well for me), except for the part with the downpipe, which must be glued to the gutter. This is for stability and also for sealing

   

  If you have any questions, just let me know! I will try to answer quickly :-)

   

   

  For this segment, I recommend printing it with support in these areas

  Good build plate adhesion is important

  

   

  For anyone having major problems with this part:

   

  Add a brim that is firmly connected to the part. Setting shown in the image below

  If you don't want a brim, I recommend trying it with glue

  Or a build plate like this: BIQU CryoGrip Pro Frostbite Panda Build Plate

   

  

  -----------------------------------------------------------------------------------------------------

  For this part, please make sure the two hooks have enough support during printing

  In my prints, it worked well with the two cylinders as support

• 
• 
• The two cylinders serve as “custom support” to prevent it from detaching during printing
• -------------------------------------------------------------------------------------------------------------------------------------------------------
• Thread settings:

•