iamwhoiam

cover

IMG_20250920_135359-1.jpg

IMG_20250928_130850.jpg

IMG_20250929_112129.jpg

plate_1.png

plate_2.png

plate_3.png

2025-09-29_1123ab317829e8.jpg

0.2mm layer, 3 walls, 10% infill

PXL_20260301_001854147.PORTRAIT.jpg

Same as the original model, stand only on a single plate for larger printers. I merged the two parts that needed to be glued together.<ul><li>0.6mm nozzle</li><li>0.3mm layer height</li><li>10% infill (giroid)</li><li>3 wall layers</li></ul>

Stand only with the two parts merged together, 0.6mm nozzle

<figure class="media"><oembed url="https://www.bilibili.com/video/BV1GdbnzqEWF/"></oembed></figure>A Stand &amp; Wall Mount designed for the <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/zh/models/105338">Multicolor Majora&#39;s Mask</a>.<ul><li>The stand can be filled with lead balls as counterweights during printing.</li><li>A 2mm diameter copper rod can be inserted into the hook for added strength.</li><li>The base needs four heat-set threaded inserts to fix it, of course you can also use CA glue.  </li></ul>

Print Profile(2)

Description

Comment & Rating (18)

License

Remixes (1)

Related Models

Stand & Wall Mount for Multicolour Majora's Mask