1U Zimaboard 2 NAS Rack For 10" Rack

A rack shelf to build a Zimaboard 2 and PCIe card into a 10" rack. Designed to suit my LabRax 3D printable rack system.

The shelf can be used with most networking PCIe cards too, provided they don't have any externally accessible ports (ports would be internal to the computer).

The Zimaboard 2 is held onto the shelf using three M3x8mm Button head screws. These can be screwed in using a long hex key through the holes in the side wall.

Visit my blog for the parts list and assembly guide - Turn your 10″ Homelab into a NAS with 3D Printable Shelves

Or watch my video below;