Lenny-B

Viti da 16mm m3

dado autobloccante m3

ranelle foro m3

cover

IMG_8778.JPG

IMG_8779.JPG

IMG_8780.JPG

IMG_8781.JPG

plate_1.png

Copri Stick gimbal del controller dji versione 3. Per completare il montaggio servono viti a brugola da 16mm m3 con relativo dado e ranelle. Il copri stick è realizzato in pla ma stampabile allo stesso modo in petg, visto che le tolleranze in questo caso non ne precludono il funzionamento. &nbsp;Se aveste bisogno di modifiche o meccanismi simili per i vostri controller o per adattare questo sistema al vostro controller non esitate a contattarmi. Grazie.

DJI controller gimbal stick cover version 3. To complete the assembly, 16mm M3 hex screws with corresponding nuts and washers are needed. The stick cover is made of PLA but can be printed in PETG as well, as the tolerances in this case do not compromise its functionality&nbsp;If you need modifications or similar mechanisms for your controllers or to adapt this system to your controller, do not hesitate to contact me. Thank you

0.08mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

COPRI STICK DJI CONTROLLER 3&nbsp;SALVA Stick gimbal del controller dji versione 3. Per completare il montaggio servono viti a brugola da 16mm m3 con relativo dado e ranelle. Il copri stick è realizzato in pla ma stampabile allo stesso modo in petg, visto che le tolleranze in questo caso non ne precludono il funzionamento. &nbsp;Se aveste bisogno di modifiche o meccanismi simili per i vostri controller o per adattare questo sistema al vostro controller non esitate a contattarmi. Grazie. &nbsp;omber1976@gmail.com

DJI CONTROLLER 3 STICK COVER&nbsp;Protects the gimbal sticks of the DJI Controller version 3. To complete the assembly, you will need 16mm M3 hex screws with corresponding nuts and washers. The stick cover is made of PLA but can also be printed in PETG, as the tolerances in this case do not hinder its function&nbsp;If you need modifications or similar mechanisms for your controllers, or to adapt this system to your controller, please do not hesitate to contact me. Thank you&nbsp;omber1976@gmail.com

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License