Too Many Bones Magnetic Day Counter Tracker

I loved the magnetic chip tracker that came with 20 Strong so I modeled one based off of that tracker for my favorite game Too Many Bones. 

I got some feedback and people suggested adding a “chip” under the tracker so it could fit in the adventure mat as well. So I have added two versions of that the adventure map tracker. 

The first version on plate 1leaves the magnet exposed and the 2nd version on plate 2 requires a pause at layer 38 and then you firmly press the magnet into the hole and it prints over it. I would suggesting hitting the top surface of the magnet with a glue stick to help the filament adhere to the magnets. My magnets were not strong enough to add additional layers on top to make it perfectly smooth but your mileage may vary. 

For the version that isn't covered, I just use a single 8x2mm magnet and hot glue it in place. It can hold the thinner day tracker chip but it isn't strong enough for the thicker one. The standard version of the tracker is on plate 3. I hope that you enjoy!

If you like my work, please consider supporting me by boosting my model or buying me a coffee!

---------------------------------------------------

Footer about my necklace models:

All of my necklaces have the ring(s) listed as separate objects so they can be easily repositioned or removed entirely to turn it into an oversized decor.

If you are looking for a chain for your logo, you can find my model here. Happy printing!