75mm Filament Swatch Organizer Box

This is a slight variation on @Mr.Brown's sample box. There are several comments requesting a 75mm version for smaller filament swatches and there did not appear to be any movement on creating one, so I opted to just create my own based on the same concept. 

This features the same filing system experience with the dividers that indicate the sample types. I made it compatible with the swatches I use from @ChancenJ. These appear to be a similar size as @fenglyu's swatch samples, but any 75mm swatch that is 50mm in height or less should work fine. 

Some notes about this print: 

• I resized the box to fit a 75mm swatch card and created a new divider card that is more appropriately sized for this updated design
• The magnet pockets are slotted for 8x2mm OR 6x3mm magnets - Glue in only
  • 6x3mm - There will be a gap around the outside and will need to be glued down
  • 8x2mm - The outside of the magnet will need to be glued and then pressed in
• I've included dividers for all of the common material types in addition to an “OUT” and “MISC” divider. These can easily be customized if desired
• I have also included a copy of the sample card I use, and the reference card I created
• A theoretical 40 sample cards should fit in the 100mm case along with 4 dividers. More can fit with fewer dividers

Thanks for checking out my variation :D!

Check out my swatch reference card that I created for an easy reference when looking at the swatches!