Search models, users, collections, and posts
Jujutsu Kaisen - Sukuna Hueforge
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
20
79
0
0
37
0
Released
Description
Project: Sukuna.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.02x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Dark Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Dark Gray
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)