Lace - Hollow Knight: Silksong

Lace from Hollow Knight: Silksong, Print in Place. I will provide two profiles: one for multicolor printing and one for single-color printing. The model's default height is around 80mm; you can scale it as needed, but since Lace's neck, waist, and weapon are very slender, I do not recommend further reducing the size.

Special note, please read the following carefully:

The supports are very difficult to remove. You must have sufficient skill and patience, and you must use pliers that can reach into narrow spaces. I have used 6 walls to increase model strength, but that is not enough to completely avoid the risk of damaging the model.

For removing supports, please follow two points:

First, you must use pliers to cut the supports into small pieces and carefully remove them; never attempt to remove them whole, or there is a high probability of damaging the model.

Second, when removing supports around the neck, hold the top and bottom of the model with your hands to effectively prevent prying damage to the neck during support removal.