Design paper tissue box cover (Taschentuchbox)

⬇️ Support my work ⬇️

Description (decorative style + dimensions + print parameters):

A stylish rectangular box with an original honeycomb bottom, which gives it lightness and a modern look. Thanks to the hexagonal pattern, it looks airy and elegant, making it suitable not only for practical storage of small items but also as a decoration for a desk or shelf. Gently rounded corners give the box a pleasant, smooth shape.

⚠️ For a more interesting surface, remember to set “Fuzzy skin” for the outer wall during printing – the box will then appear even more attractive to the touch and sight.

ℹ️ Dimensions:

• U can use resize function in BambuSlicer. Ratio is 0,52 (original size 210x110 =>  135x57,2mm)
• Width, length and height are given as internal dimensions (i.e., your desired dimension + wall/top thickness)
• The diameter of the honeycomb is the Specified value*2 (standart 5*2 = 10mm)
• Wall and top thickness are set to 5mm for better stability
• The dimensions of the hole (for pulling out the handkerchief) can be adjusted as needed 
• The circle around the hole is fixed at 3 mm. The inner edge is bevelled for easier tissue removal

🖨️ Recommended print parameters:

• Material: PLA or PETG (for greater strength)
• Infill: 15–20 % (the honeycomb bottom already lightens the box)
• Number of perimeters: min. 2 for strong walls
• Layer height: 0.2 mm for a good balance of quality and speed
• No supports – the model is optimized for printing without them

Paper tissue u can find on Amazon or in your local store

AMAZON | EVA.cz (Universal size fit for this)

⬇️ Enjoying it? Show some love ⬇️

⬇️ Don't forgot check my other models ⬇️