F-22 Raptor Hueforge
Print Profile(1)
Description
HueForge of an F-22 Raptor.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
Filaments Used:
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#84754e PLA BambuLab Basic Bronze Transmission Distance: 1
#8e9089 PLA BambuLab Basic Gray Transmission Distance: 2
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Turquoise
At layer #4 (0.4mm) swap to Blue
At layer #12 (1.04mm) swap to Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #17 (1.44mm) swap to Bronze
At layer #19 (1.6mm) swap to Gray
At layer #21 (1.76mm) swap to Beige
At layer #26 (2.16mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)