Astro Planter
Print Profile(1)
Description
Model
Astro-Planter - a planter in the shape of a half moon, with an astronaut on its edge.
Designed in Nomad Sculpt.
See making of:
Print Settings
Layer height: 0.28mm
Infill: 15%, gyroid
Supports on the Astronaut (Plate 1), no supports on the Moon and Plate (Plates 2-3)
Print time (Bambu P1S):
- Astronaut: 15h2m
- Moon: 3h53m
- Plate: 1h12m
Total print time: 20h8m
Filament
AMS: 4 colors for Astronaut, 1 color for Moon/Plate
Model:
- Astronaut: 111.36g
- Moon: 157.40g
- Plate: 59.62g
Flushed:
- Astronaut: 183.84g
- Moon: 0.01g
- Plate: 0.01g
Tower:
- Astronaut: 32.89g
- Moon: N/A
- Plate: N/A
Total: 545.12g
Filaments used in the pictures:
- Bambu PLA Matte - Lemon Yellow
- Bambu PLA Basic - Ocean to Meadow
- Bambu PLA Basic - Jade White
- Bambu PLA Sparkle - Slate Gray Sparkle
Assembly
Once the 3 plates are printed, attach the Astronaut to the half-moon holes with a bit of glue, hold in place, and then place the half moon on the plate.
Then add a plant or flower with some soil in the half moon, and you're done!
Note
The astronaut may be a bit heavy once it's attached to the moon, but don't worry, once you add some soil, the planter will become sturdy and balanced.
Upon request I can upload a new profile with less infill on the astronaut and more infill on the moon, or adjust the infill yourself in the slicer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)