Bowser – The King of the Koopas
Print Profile(1)
Description
Bring the fiery might of the King of the Koopas to life with this Bowser Hueforge 3D print!
This piece blends bold grayscale contrast with striking orange highlights that capture Bowser’s fierce energy and raw power.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#ffffff PLA+ Sunlu White Transmission Distance: 8.5
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to White
At layer #25 (2.08mm) swap to Orange for the rest.
Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays at 3.2mm as changing this will affect how the print turns out)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)