Surfing Squirtle - ball joint Pokemon
Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
Your support is important and it helps me to make more and better designs!
Please read before printing:
Please make sure build plate cleaned for best result.
Ball joints suggested to use TPU for best result.
Assemble guidance:
1. put ball joints into neck, arms and legs first (if TPU ball joint is hard to fit, please use pliers to pinch it and push it in)
2. insert all joint connectors
3. connect head and neck joint with 1.75mm filament
4. connect tail and body with 1.75mm filament
5. plug arms, legs and head into the holes on the body (glue needed)
6. shell should be easy to figure out
(strongly recommend to install ball joints first, before inserting connectors)
magnets on surfboard are optional. The second surf board in the print file is for none magnets installation
Hope you like this model! Enjoy!
Boost Me (for free)
Your support is important and it helps me to make more and better designs!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)