Bronco Door Pockets
Print Profile(3)
Description
I saw the work done by MichMaker11B and kinda ran a bit further with it replacing the driver and passenger door nets in my 2022 Ford Bronco with extra pockets and a cup holder. The cup holder attaches to the large pocket using 3 m4x8 screws (6mm or 10mm length should work too) I printed with ASA but also had people in the Bronco forums print with PETG so personal preference really.
I added tabs to the thin walled parts that will need to be trimmed off before installed, this prevented me from having to do a raft when printing.
Install
1) remove the 6 screws holding on the door net
2) remove the door net from the frame
3) screw the large pocket to the cup holder using m4x8 screws
4) locate all the parts over the posts on the frame from the bronco
5) screw back down
Removable bins for the Large pockets linked below
https://makerworld.com/en/models/2218370-bronco-door-pocket-inserts#profileId-2412257
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (169)