Print Profile(1)
Bill of Materials
Description
Fits 3-inch instant photo paper and other cards not exceeding 85x54mm with a thickness of 0.8mm or less
Only displays the image area, minimalist style
The Print in Place stand can be pried open with a spatula after printing is complete, it can stand when opened to its maximum angle, utilizing PLA's inherent toughness, it can be used dozens of times without damage
The top-left opening can attach a keychain or a lanyard through the middle cutout (PS: However, the stand cannot be used if the center of gravity shifts, please choose as needed)
It is recommended to use PLA and print after thorough drying to achieve the most perfect surface finish
Our model introduction video: https://www.bilibili.com/video/BV1Hg4tzeEN8/?spm_id_from=333.1387.homepage.video_card.click&vd_source=9151da064b9d529deb870be32fa509db
Our shop, more related finished products will also be sold here, welcome to take a look: https://shop210880277.taobao.com/?spm=pc_detail.30350276.shop_block.dshopinfo.565b7dd65s86aD
Recommended material: White Marble
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)