Search models, users, collections, and posts
Spool roller
IP Report
Print Profile(5)
for 608 bearings, 0.2mm layer optimized, 3 walls, 10% infill
Designer
4.3 h
1 plate
65mm rolls, 0.2mm layer, 3 walls, 10% gyroid infill, 1mm top/bottom, tree support (optional)
Designer
3.3 h
1 plate
110mm rolls, 0.2mm layer, 3 walls, 10% infil
Designer
4.1 h
1 plate
both sided stand,0.2mm layer optimized , 3 walls, 10% infill, with support
Designer
1.3 h
1 plate
Click to see more
Open in Bambu Studio
Boost
294
756
94
49
1.1 k
586
Released
Description
This roller needs 4 bearings 21x15x4. Alternative there are raw model and print profile for 608 skate bearings. To provide a proper fitting of bearings, make sure, that your printer is calibrated.
The long roll length is 110mm and it is suitable for bride spools. The short one is for normal rolls and is 65mm in length.
Also use the the latch with the proper length.
There is also a stand, that allows you to attach rolls on both sides. So you can build a roll stand for more than one spools, for example for a dry box (see pictures).
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (94)