Russia PSO-1 telescopic for AK SVD ASV VSS VSK SR3

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

Special thanks to @Nimuron for the sample photos, they are perfect.

The PSO-1 (Прицел снайперский оптический, Pritsel snaipersky optichesky, "Optical Sniper Scope") is a 4×24 telescopic scope manufactured by the Novosibirsk Instrument Manufacturing Plant (NPZ State Optical Plant) in Russia and issued with the Russian military's Dragunov sniper rifle. The PSO-1 is considered the high-end of Soviet military side-mounted telescopic scopes, exceeding the quality of most other PSO-style scopes. The side rail features a dedicated scope mount with adjustable tension.
This side rail is a dovetail rail, also known as the "Warsaw Pact" rail, with cutouts to reduce weight and simplify installation. The PSO-1 is compatible with all firearms equipped with this rail, meaning it can be used on nearly all former Soviet/Russian weapons, including:PP-19“Bizon”／PP-19-01“Vityaz”   Saiga／Saiga-12/Saiga-20/Saiga-410   AK-47／AKS-47／AKM／AKMS／AKMSU／RPK   AK-74／AKS-74／AKS-74U／AK-74M／RPK-74   AK-101／AK-102／AK-103／AK-104／AK-105／AK-9   AK-107/AK-108/AK-109   AN-94“Abakan”   AEK-971/AEK-972/AEK-973     AS“Val”／VSS“Vintorez”／SR-3/SR-3M/SR-3MP“Vikhr”   9A-91／VSK-94   OTs-12“Tiss”   OTs-14“Groza”   ASM-DT   SV/SVDS／SVDK／SVU/SVU-A/SVU-AS   V-94/OSV-96   SVN-98/KSVK   RPK-201／RPK-203   PK/PKM／Pecheneg／AEK-999“Barsuk”   Kord 12.7

You need an M5X0.8X25 and a st4.8X16 self-tapping screw to fix it firmly（The orange part in the picture above）,If you have the conditions, I recommend you use TPU to print eye masks.

 

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.