Dragonburner Mount for Adventurer 3 with EBB36

🚧 Work in Progress

⚠️ Important:
This adapter is only intended for the Flashforge Adventurer 3 running Klipper.
It is not compatible with the stock firmware.

For support and discussion, please join the Klippventurer Discord:
https://discord.gg/NhamDbpxSF

I’ve updated the fantastic work by @McGrimey so that it’s now possible to use an EBB36 (or similar board) together with the Dragon Burner on an Adventurer 3.

Versions

• V0
  Uses the standard EBB36-DragonBurner mount by MapleLeafMakers,
  secured with 2× M3 screws and 2× M3 heat-set inserts.

  You'll NEED to use an Extended Extruder Mount from the Dragon Burner Repo!

• V1
  Integrates the EBB36-DragonBurner directly into the carriage.
  This version is based on the sharkfin.stl file from MapleLeafMakers’ repository 

  The model has been modified to directly mount to the X Carriage, and is secured using one of the 40 mm screws from the main BOM.

  You can use the Normal Extruder Mounts

🧰 Bill of Materials (BOM)

Additional parts for V0

• 2× M3 heat-set inserts (recommended: M3×4×5)
• 2× M3×10 mm screws (or longer)