Russia SR-3M Vikhr rifle (No move or launch)

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Thank you to everyone who provided me with the photos.

 

Thanks @AmserTheTree for the sample photos. I hope you can share better photos.

You need M5 and M4 screws and nuts to fix the front and rear grips respectively.

 

The SR-3 Vikhr (СР-3 Вихрь, Russian for "whirlwind") is a Russian 9×39mm compact assault rifle. It was developed by A. D. Borisov, V. N. Levchenko and A. Tyshlykov at TsNIITochMash (Central Institute for Precision Machine Building) in the early 1990s and was manufactured in 1994. Heavily based on the AS Val, but lacking an integral suppressor, it has a newly designed folding stock and charging handle for ease of concealed carry. The abbreviation "SR" stands for spetsialnaya razrabotka—special development.

Because the SR-3 Vikhr is a rather expensive lightweight carbine, it was not mass-produced for the Russian military. It was[when?] primarily used by the Russian Special Operations Forces and certain government officials' security details.

 

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.