SideSkate — Side-Mounted Skateboard for Strollers

This is a unique side-mounted skateboard attachment for baby prams — designed for Maked Classic baby pram, but the included STEP file allows you to adapt it to other models.

🛡️ UPDATE (November 7, 2025): New Optional Spoke Guard Added!

Thank you all for the amazing feedback and valuable suggestions on this project!

Some users raised a valid concern about the child's foot getting close to the stroller's wheel spokes. Based on that community feedback, I have designed and added a new optional Spoke Cover / Foot Guard to the print files, and also as a STEP file.

This new part is a simple print that attaches easily with 3 zip-ties and acts as a barrier to keep little feet safely away from the wheel.
 

🛹 Why I made this project:
All the skateboard attachments I found were designed to run behind the pram. That made it tricky to push and easy to kick into — not ideal. So I made a side-hovering skateboard platform, letting my bigger child ride next to the pram instead of behind it. It’s more fun, more social (kids can interact while riding), and still safe as long as you pay attention to where the foot goes.

🔩 Quick-release setup:
Attaches and detaches in just a few seconds — no tools, no fuss. Great when you need to fold the pram or pack it into the car.
pop it on when your little co-pilot wants to ride. It can be installed to both sides.

👶 How it works:
The child rides sideways, like on a real skateboard, but can hold the pram for balance. It also doubles as a seat when needed.

Surprisingly strong — it can hold up to 100 kg (the attachment will withstand it. But I recommend to use it for toddlers up to 25 kg) and works perfectly when printed from PETG (cheap ones are fine).
 

🛠️ What you need:

• 1x real skateboard deck (max width 144 mm)
• 3x wooden sticks (700 mm long, 27-28 mm diameter)
• 8x M4×80 mm flat-head screws - with nuts and washers (8x)
• 32x M4×50 mm flat-head screws - with nuts and washers (32x - outer diameter MAX 16 mm)
• A drill (you’ll need to drill holes in the skateboard and remove the wheels)

🧩 Printing notes:

• It’s a big print, taking roughly a full day total (split into several buildplates).

• Requires some post-processing / cleanup — I used sacrificial layers in the screw holes and one other area for easier printing.

  

• One plate (plate 7) — the “fixing element" — must be printed in PLA so it wont bond with the PETG part where you insert it. Print this plate first!!!

• Two plates (3 and 6) of the included print profile has a “Pause print” added, then you have to place the “Fixing elements" to the ”Adapter_for_the_pram_outer_2x" part (See the picture below):

  

• All parts are designed for easy assembly and strong mechanical connection.

⚙️ Compatibility:
Designed specifically for the Maked Classic baby pram, but others can modify the included STEP file to fit their setup.

⚠️ Safety & Disclaimer

This is a DIY project and requires responsible use. Please use common sense and always prioritize your child's safety. By downloading and using this design, you acknowledge that you do so at your own risk.
 

Safe Use Guidelines:

• Adult Supervision: This attachment must only be used under direct and active adult supervision.
• Stop First: Teach your child to always tell you before they hop on or off, and to do so only when the stroller is completely stopped.
• Hold On: The child must hold onto the stroller frame with both hands at all times while riding.
• Stand Steady: Instruct your child to stand steadily on the skateboard and keep their feet clear of the stroller's wheels and spokes.
• No Leaning: Do not allow the child to lean back or make sudden movements / jumps that could unbalance or tip the stroller.

The creator is not responsible or liable for any damage, accident, or injury that may occur from the assembly or use of this product.