Canton Tower repeatable spiral crossing fidget toy Print in Place TD1 Canton Tower

This is a unique spiral crossing fidget toy designed based on the appearance of the Canton Tower.

You can continuously flip and rotate it back and forth. It has an interlocking mechanism, so it won't separate, making it very stress-relieving.

Printing is super simple, Print in Place, no supports. Playable right after printing, very smooth.

Dimensions are approximately: 48mm x height 160mm.

In this profile, I have slowed down the printing speed to accommodate aesthetic filaments like silk under default parameters for a better surface finish. If using basic or performance filaments, the printing speed can be adjusted, but this model is tall, so printing at too high a speed is not recommended.

When printing tall, slender models, be sure to clean the build plate to prevent failures due to insufficient adhesion. Before printing, ensure the filament is dry. For printers with an enclosure, please open the door appropriately, as good ventilation and heat dissipation can result in a better overhang appearance.

Thanks to all that have downloaded, liked, commented, or boosted my models you don't know how much I appreciate all of you and please feel free to continue to do so.

Welcome to my folder. I will continue to update it with more fun and interesting stress-relief toys.

Planetary Gear Spinner

Helical toy

Ratchet toy

spinning top