Finger Shaker
Print Profile(1)
Description
Add a percussion beat to your guitar or ukulele playing while strumming!
You will need:
- Elastic (I used a 12mm fabric elastic)
- Something to put in the shaker (try rice, small screws/washers/nuts, ??)
Feed the elastic through the inside of the shaker, tie it in a knot so it is just tight and cut off the ends.
Align the elastic so it is flat, facing the finger area, in the cutout and the knot inside
- Screw on one end cap tightly
Fill with a small amount of something to shake - try different amounts and materials to get a sound you like!
- Screw on the other end cap tightly
Attach to your finger and shake, shake, shake! It should work with your normal strumming of a guitar/ukulele.
For playing, this video may help guide you:
https://youtu.be/g7fdWgsDE38?si=o_sozGVQsSV0dYC4
I printed this with support (just for the gap at the bottom of the body/tube where it touches the build plate. I used a brim but you may not need it depending on your bed adhesion for the tube/body
Boost Me (for free)
If you like my design please consider giving me a Boost - it means a lot!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)