Lamp / Winter Decoration
Print Profile(2)
Bill of Materials
Description
Membership
Boost Me (for free)
I am happy about everyone who supports me with a FREE Boost.😁😁
Caution !! The ring is very large and takes up almost the entire plate. If you use auto-calibration, please immediately remove the test lines that the printer makes at the beginning of the print before starting the print.
The 2 motifs and the motif holder are connected with glue.
The other parts can be easily assembled.
( it is possible that no glue is needed at all, varies depending on the printer ) !!
Please try out all parts before gluing to see if they fit !!!!
It's best to start with the LED strips and the ring. Everything has notches or the right shape for assembly, except for the motif holder which is then inserted into the ring.
You need a minimum of approx. 700mm long LED and the LED must be a maximum of 10mm wide
It is best to buy a 1-meter long and cuttable LED strip and then cut it to the appropriate length.
If something doesn't fit and you can't fix it by scaling, please send me a private message so I can solve the problem.
Please do not immediately address the problem with a bad review. Every printer is different and some things may need improvement. Unfortunately, I can only judge whether it fits or not based on my printer. Thank you 😊
Have fun printing
I would be very happy about nice comments, pictures or a boost 😁
For more designs, simply check out my profile :
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (60)