Plant pot riser / Sink Riser

This compact, star-shaped riser sits under a pot

What is

• A sleek 10-arm star that supports pots at multiple points for great stability.
• Flat center with rectangular arms; works on wood, tile, and concrete without wobble.
• One-piece print; nothing to assemble.

Adaptable

• Scales perfectly in your slicer: increase XY for bigger pots, increase Z for more lift.
• Rotation-agnostic: the radial layout supports round, square, or irregular pots.
• Any surface: use as a single riser for small pots or place 2–3 under trough/rectangular planters.
• Material-flexible: PLA for indoor, PETG/ASA for humid or outdoor spots, TPU for grippy, floor-safe contact.
• Remix-friendly: easy to stretch arms, change count, or add chamfers/feet if you want custom drainage height.

Suggested print settings

• Layer height: 0.20–0.28 mm
• Walls: 3+ (≥1.2 mm)
• Infill: 20–40% grid/gyroid (go 60–100% for very heavy pots)
• No supports; brim optional for small printers
• Orientation: face down on the bed (flat center on build plate)

Sizing guide (scale as needed)

• Ø100 mm (default) → great for 8–18 cm pots
• Ø140 mm → 15–25 cm pots
• Ø180 mm+ → large planters / outdoor use
• Z-height: 6–12 mm is plenty for drainage; raise Z for more airflow.