Hueforge Pirate Ship
Print Profile(1)
Description
I have been experimenting with Hueforge for about a month now, and this is the first model I liked will enough to publish. I hope you like it too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
#000000 PLA BambuLab Basic Black 10101 Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray 10602 Transmission Distance: 3
#6c6865 PLA BambuLab Basic Gray 10103 Transmission Distance: 2
#e4bd68 PLA BambuLab Gold 10401 Transmission Distance: 3.5
#ffffff PLA BambuLab Basic Jade White 10100 Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Basic Black 10101
At layer #11 (0.96mm) swap to Blue Gray 10602
At layer #22 (1.84mm) swap to Gray 10103
At layer #28 (2.32mm) swap to Gold 10401
At layer #33 (2.72mm) swap to Jade White 10100
At layer #36 (2.96mm) swap back to Basic Black 10101 for the rest.
AMS:
Load Black, Blue Gray, Gray, and Gold in slots 1-4. When slicing, assign the slots 1-2-3-4-2. Once you hit layer 28 and before you hit layer 33 replace the Gray in slot 2 with Jade White.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)