Domino "DC" Direction Changer

As a passionate domino builder, I once created a direction changer. This allows the line to continue directly in the opposite direction, 180 degrees, in the smallest area

The dimensions are taken from the WDT (Wiedenbrücker Domino Team), which is the only team in Germany that still builds annually. I build with them myself and have used their measurements

FURTHER MODELS

I have created more models for domino fun. Feel free to check them out, maybe there's something else you could use

DOMINO LINE SAFETY BARRIER

Domino Line Safety Barrier – Free 3D Print Model – MakerWorld

This allows you to incorporate individual safety measures in between when building larger and longer projects and want to minimize the risk

DOMINO STAIRS

Domino Stairs – Free 3D Print Model – MakerWorld
With these stairs, you can bridge other lines and build cool intricate layouts. It also helps to utilize the space in your home. The domino stairs have plates of different widths that can be placed on top, so one or two lines can be bridged

DOMINO STAIRS WITH ANCHOR

Domino Stairs with Anchor – Free 3D Print Model – MakerWorld

If you find the regular stairs cumbersome because the top plates sit loosely, I have designed stairs with an anchor. The top plate hooks onto the steps and sits firmly. Nothing can slip, and you can even align the stairs more easily for building. Here too, there are top plates of different lengths

DOMINO CROSSING

Domino Crossing – Free 3D Print Model – MakerWorld

If you find the bridges too large because you want to cross lines in a very small space, for example, there is another option, namely the crossing. The part is placed exactly in the middle of both lines, and the pins push the line on the other side, without a bridge being used or the other line accidentally being nudged

DOMINO “DC” DIRECTION CHANGER

Domino "DC" Direction Changer – Free 3D Print Model – MakerWorld

This direction changer makes it possible to change the direction of the line in a small space. This avoids building curves, which use up dominoes and are also a potential failure point, because if the curve is not built correctly, the line can stop. This DC is an ideal replacement

MINI DOMINO CROSSING

Mini Domino Crossing with Integrated Pins – Free 3D Print Model – MakerWorld

This mini domino crossing is much smaller, so it disappears better between the lines

The pins are also directly integrated, so they cannot fall out. This allows you to cross two lines in an even smaller space without bridges

DOMINO SLIDE

Domino Slide – Free 3D Print Model – MakerWorld

Why always stairs? I asked myself the same question and designed the Domino Slide instead. It is compatible with the domino stairs I designed, so it can replace stairs or even be used as the start of a line. This allows you to use it in various ways

MINI DOMINO “DC” DIRECTION CHANGER

Mini Domino "DC" Direction Changer – Free 3D Print Model – MakerWorld

This DC is even smaller, allowing lines to stand closer together. This can replace tight curves that are very likely to fall

I would be very happy if you would check out the other parts, perhaps print some, and give me feedback so I can improve them

New parts or improvements will also follow from time to time, so feel free to follow me so you don't miss anything