Bentley the Friendly Bernedoodle
Print Profile(1)
Description
My first attempt at making a statue of my dog. We have an absolute teddy bear of a dog named Bentley who is a Bernedoodle. While technically his coloring is considered one of the less desirable colorings for Bernedoodle, we think he's perfect. I started with a photo of Bentley and converted that photo into a cartoonish image of him just to simplify the coloring somewhat, I then uploaded to MakerWorld's Image-to-3D tool to create a statue out of it. The initial attempt left out his tail so I had to make several adjustments there, and then I adjusted it down to 4 colors and then added a fifth color in White and then using the 5 colors adjusted the painting a little to match his actual coloring. Overall I think it turned out great.
Keep in mind it will take a long time to print, and will have a lot of filament waste due to the number of color changes on it. I printed 6 of them at 50% but in .16 quality settings, and it took around 15 hours. At 100% with a single print using the uploaded settings it takes around 23 hours.
I used the following colors all from Bambu Labs:
PLA Matte - Desert Tan
PLA Matte - Charcoal
PLA Matte - Caramel
PLA Basic - Cocoa Brown
PLA Basic - Jade White
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)