Magic: The Gathering Avatar Airbending Counters
Print Profile(1)
Description
Airbending Counters for Magic: The Gathering Avatar
Before you head to prerelease, or as you finish building your Avatar Aang commander deck, print some of these Airbending Counters!
- Quick to print: 9 counters will print in just 40 minutes with the 0.4mm nozzle or a little under 3 hours with the 0.2mm nozzle (print profile is with the 0.2).
- Dual Sided: The image is on both sides.
- Customizable: The image is embedded in the model, so it's easy to change the colors to your liking.
Boost Me (for free)
Like my designs? Consider sending me a boost. They keep me inspired to make more Magic: The Gathering accessories.
Want to sell physical copies of my prints? Subscribe to my Patreon for a commercial license!
Not much to know special to print these. Like I said before, the images are with the 0.2mm nozzle, but they will print just fine with 0.4mm nozzle. I do recommend setting the initial layer to .3mm if you print with the 0.4mm. Also set the heatbed to 60 degrees and slow the initial layer down to 30mm/s to help with adhesion.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)