Foldable phone stand (customizable pattern)

This is a small portable phone stand.

1. How is this model good:

• The pattern type and density are customizable (as shown down below)✅
• You can print it in multi-color with/without the AMS (the without AMS multicolor printing instructions are down below)✅
• It's flodable✅
• It's small/portable✅
• No assembly✅
• Phone can be mounted vertically✅
• Under 10g of filament✅
• Under 35min of print time✅

2. How to print the no AMS multi-color print profile:

There is one pause (the printer will do it automatically).

Start the print with the color that you want for the base.

Wait until the printer pauses.

Now when it's paused unload the filament and load the next color filament and un pause the print.

3. How to customize the pattern type and density:

First step: open the project in Bambu Studio

Now go to the prepare tab at the top

Now go to the object settings (as shown)

Now select the object (as shown)

Go to the strength settings and scroll down until you see the sparse infill section.

Now you can select the pattern type (from the “sparse infill pattern”) and density (from the “sparse infill density”)

Then click slice in the top and print!

Have fun!